Özşahin having a yearly capacity of 11.000 tons, covers not only standard products but also customized production. With our high-tech facilites we are able to produce granules according to the needed color, strength and density.
Thermogran® is not only a popular line in the local market but also a highly demanded product overseas.
All manufactured products are tested in our own quality control laboratory and later on dispatched for customer delivery. Our tests include all steps of the cycle including density, thickness, stretching and fracture
Density Test: Thermo plastic has a density margin between 0,96 and 1,01 gr/cm3, differing accordingly with the qualityof materials used. It is also possible to reduce density by using lighter formulas.
Hardness Test: Hardness test differs according to customer request. Production is based between 30-90 Shore A.
Abrasion Test: This test detects the amount of abrasion quality of the product. For any problems not to occur, the maximum depreciation rate should be 240 mm3
Ultimate Strength - Elongation Test: This test detects the resistence and strength of the product. The distention ratio should be at least 40 kg/cm2. The elongation ratio should be at a minimum of %350. Additional tearing tests are also applied.
|AREAS OF USE|
|•||Shoes and Slipper Soles|
|•||Cables, Cords and Wires|
|•||Tubes, Pipes, Rolls|
|•||Armrests, Handles (Cars)|
|Density||g/cm3||DIN 53479||0,99 +- 0,01|
|Hardness||Shore A||DIN 53505||30 - 90 +- 2|
|Abrasion||mm3||DIN 53516||180 +- 10|
|Ultimate Strength||kg/cm2||ASTMD 412||44 +- 5|
|Elongation||%||ASTMD 412||1100+- 100|
|Breaking Strength||mm||100.000 steps “0”|